top of page
This site was designed with the
.com
website builder. Create your website today.Start Now
The International Association for Fire Safety Science (IAFSS)

 

INTERMEDIATE-SCALE FIRE TEST − STEPPING STONE FOR PREDICTION OF MATERIAL FLAMABILITY IN REAL-SCALE FIRE THROUGH BENCH-SCALE FIRE TEST DATA

 

Toxicity Assessment of Products of Combustion of Flexible Polyurethane Foam

 

Toxicity of the Combustion Products from a Flexible Polyurethane Foam and a Polyester Fabric Evaluated Separately and Together by the NBS Toxicity Test Method

 

Toxicity Assessment Of Products Of Combustion Of Flexible Polyurethane Foam

 

Downward Smolder Of Polyurethane Foam

 

Transition From Forward Smoldering To Flaming In Small Polyurethane Foam Samples

 

Smoldering Combustion of Horizontally Oriented Polyurethane Foam with Controlled Air Supply

 

Polyurethane Foam Smoldering Supported by External Heating

 

Halogen-free Flame-retardant Thermoplastic Polyurethanes

 

Fire Resistance of Wood-Framed Exterior Walls: The Effect of An External Air Cavity and External Insulation

 

Ventilation Effects on Compartment Fire Characterization

 

A Procedure for Predicting the Heat Release Rate of Furniture Composites from Measurements on their Components

 

AN EXPERIMENTAL STUDY OF EJECTED FLAMES AND COMBUSTION EFFICIENCY

 

Correlation between Small-Scale Rate of Heat Release and Full-Scale Room Flashoverfor Surface linings

 

Ventilation Effects On Compartment Fire Characterization

 

The Effects of Fire Products on Escape Capability in Primates and Human Fire Victims

 

EXPERIMENTAL AND COMPUTATIONAL ASSESSMENT OF HOT SMOKE AND MORE REALISTIC FIRE TESTS IN LARGE ENCLOSURES, Part 1: Experimental Results

 

EXPERIMENTAL AND COMPUTATIONAL ASSESSMENT OF HOT SMOKE AND MORE REALISTIC FIRE TESTS IN LARGE ENCLOSURES, Part 2: Numerical Predictions

 

Fire Growth And Fire Detection In Air-Conditioned Rooms

 

An Analysis of Compartment Fire and Induced Smoke Movement in Adjacent Corridor

 

THE THERMAL DECOMPOSITION PRODUCTS OF RIGID POLYURETHANE FOAMS UNDER LABORATORY CONDITIONS

 

THE HAZARD FROM FIRES OF SMALL LOADS OF FLEXIBLE POLYURETHANE FOAM

 

THE THERMAL DECOMPOSITION BEHAVIOUR OF SOME COMMERCIALLY AVAILABLE FLEXIBLE POLYURETHANE FOAMS

 

STUDIES OF THE THERMAL DECOMPOSITION OF FLEXIBLE POLYURETHANE FOAMS IN AIR

 

EXPERIMENTS ON SMOKE DETECTION PART 3: FIRES IN EXPANDED POLYSTYRENE, POLYURETHANE FOAM, AND COMPRESSED CORK

 

INHALATION TOXICITY OF PYROLYSIS PRODUCTS FROM POLYURETHANE FOAMS

STRUCTURAL INSULATED PANELS (SIP) LINKS

 

Looking for some background on existing research? Click on the report titles to be taken to those relevant to our project.

SP Technical Research Institute of Sweden

 

Results and Analysis From Fire Tests of Building Products in ISO 9705, the Room/Corner Test

 

The Development of a European Fire Classification System for Building Products Test Methods and Mathematical Modelling

 

Development of a Screening Method for the SBI and Room Corner using the Cone Calorimeter

 

Development of a Test Procedure for Sandwich Panels Using ISO 9705 Philosophy

 

Prediction of Heat Release Rates of Surface Materials in large-scale Fire Test Based on Cone Calorimeter Results

 

The CBUF Cone Calorimeter Test Protocol

 

Interlaboratory Comparision between SP and NIS, Egypt on the cone calorimeter

 

Comparative Data from LIFT and Cone Calorimeter Tests on 6 Products, including Flame Flux Measurements

Edinburgh Research Archive (ERA)

 

Buoyancy Effects on Smoldering of Polyurethane Foam

 

Modeling of One-Dimensional Smoldering of Polyurethane in Microgravity Conditions

 

The Piloted Transition to Flaming in Smoldering Fire Retarded and Non-Fire Retarded Polyurethane Foam

 

Application of Genetic Algorithms and Thermogravimetry to Determine the Kinetics of Polyurethane Foam in Smoldering Combustion

 

Analysis of Principal Gas Products During Combustion of Polyether Polyurethane Foam at Different Irradiance Levels

 

Computational Model of Forward and Opposed Smoldering Combustion with Improved Chemical Kinetics

 

Computational Model of Forward and Opposed Smoldering Combustion in Microgravity

 

Experimental and numerical investigation of the thermal decomposition of materials at three scales: application to polyether polyurethane foam used in upholstered furniture

 

Smouldering and self-sustaining reactions in solids: an experimental approach

National Institute of Standards and Technology (NIST)

 

RECONSTRUCTING THE STATION NIGHTCLUB FIRE – MATERIALS TESTING AND SMALL-SCALE EXPERIMENTS

 

Fire Spread Through a Room with Polyurethane Foam Covered Walls

 

Aspects of the Fire Behavior of Thermoplastic Materials

 

Assessment of a Medium-Scale Polyurethane Foam Flammability Test

 

Smoldering in Flexible Polyurethane Foams: the Effect of Foam …

 

Factors Influencing the Smoldering Performance of Polyurethane Foam

 

Fire Spread and Growth on Flexible Polyurethane Foam

 

Impact of Test and Foam Design on Smoldering

 

Role of Bench-Scale Test Data in Assessing Real-Scale Fire Toxicity

 

Factors Influencing the Smoldering Performance of Polyurethane Foam

 

Flammability Characterization of Foam Plastics

 

Reduced Flammability of Polyurethane Foam Using a Carbon Nanofiber-based Multilayer Nanocoating

University of Canterbury Thesis

 

Evaluation of timber floor systems for fire resistance and other performance requirements

 

Performance of Expanded Polystyrene Insulated Panel Exposed to Radiant Heat

 

Guidelines for the use of expanded foam polystyrene panel systems in industrial buildings

BRANZ

 

Bio-SIPs: a deeper shade of Green?

 

Flame Barriers for Foamed Plastics

 

Future Directions in Fire Testing of Building Products

VTT Technical Research Centre of Finland

 

Prediction of smoke production and heat release by convolution model

bottom of page